Enterprise Name: Jiashan Wang Machinery Co., Ltd.
Contact person: Manager Zhang 15921811816
General Wang 13806713135
Address:Zhejiang Company-No. 9, Lane 31, Jiashan, Zhejiang
Guangxi Agency-No。 425, Chenxiong Mechatronic City, Nanning, Guangxi
With the continuous development of the furniture industry, the effect of sander is more and more important. The operation power of sander determines the speed of furniture production. To ensure the operation power of sander, the first thing is to maintain the sander.
Do a good job of cleaning the sander. Clean every part of the sander on time to keep the smoothness of the sander.
Check every working part of sander on time. Here we mainly look at the woodworking machinery complete set of equipment in the process of operation whether there is abnormal noise or noise, as well as woodworking machinery whether there is a severe heat condition, once found problems should be immediately tested and repaired to ensure that the excellent working condition of sander.
Lubricate the sander on time. It is very important to keep the lubrication of the equipment. Only when the machine keeps smooth all the time can the sander run well.
The sawdust left by sander should be cleaned up in time. Otherwise, the sawdust will accumulate too much, which will easily enter the inside of the sander, and then affect the use effect of the sander.
Sander is such an important machine, the maintenance of its accessories can not be ignored, so here, let's have a detailed understanding of the maintenance of sander accessories!
The first thing you need to do is the maintenance of the reducer. In the third month after you bought the product, you need to change the oil of the reducer. But what you need to be careful about is not that you change it regularly for three months, but that you change it every 2000 hours after the first oil change. And pay attention to the need to lubricate other parts of the sander every month to reduce wear and tear.
Next, we need to pay attention to the problem of conveyor belt. If the conveyor belt is too tight, it will simply lead to the deformation of the conveyor shaft. If it is severe, it may also lead to cracking. Therefore, you need to pay attention to the tightness of the conveyor belt of sander.
Finally, the need to remind you that if you want to maintain the parts of the sander, you should be careful not to let the sun shine directly, because if the time of direct sunshine is too long, it will simply cause UV tweezers to dry on the UV putty will dry on the coating wheel, once such a situation occurs, it will simply lead to the coating wheel eventually. Damage. I hope you will be careful.
Knowing the maintenance methods of sander accessories, I hope you can strictly follow these maintenance methods in order to extend the service life of your machine.