Enterprise Name: Jiashan Wang Machinery Co。, Ltd。
Contact person: Manager Zhang 15921811816
General Wang 13806713135
Address:Zhejiang Company-No. 9, Lane 31, Jiashan, Zhejiang
Guangxi Agency-No. 425, Chenxiong Mechatronic City, Nanning, Guangxi
Now the use of special-shaped sander is more and more widespread in the local, hot press manufacturers of special-shaped sander is more and more widely used, on the receipt of goods, we should pay attention to the inspection, do not hurt themselves, and carefully check to see if there are any problems on the machine, to prevent some problems in the process of future use. At the end of the matter, when the equipment is in contact with the ground, strong and robust, and the safety of our machine should be considered ahead of time, can be smooth in this special-shaped sander is commonly used in the local, then we should adhere to the level of latitude balance, use sealant to fix, close.
Our machines are equipped on the planned drawings when they are equipped, and when we are equipped, we should not easily change the direction of the ground cabinet. We should place the equipment according to the distance and orientation on the drawings to see if there are scratches or damages, whether there are openings or not on the switch of the machine. Turn off, hand height is common, and remember the two local distances to see if they are common, to prevent a small distance.
When we are in the equipment hanging cabinet, we should consider its safety and the knot is not strong, in the horizontal level to achieve a small amount, and our hanging cabinet screw to ensure that it is strong enough to withstand the weight, and to check whether the hardware fittings are correct, about the requirements of hardware fittings, wood wire drawing machine only needs. Guarantee, can not have significant sharp, high quality, anti-corrosion and oxidation, strong can be used, in hardware accessories, pull basket drawer inspection is particularly important, to ensure that the equipment is strong, relatively to repeatedly switch to verify whether it is clear, there is no residual movement.
The gap in the drawer must be even. If the basket can be closed voluntarily after 20 mm swing, it proves that weighing is good. The equipment of the cabinet also includes the water tank equipment and the kitchen stand. The detailed size of the water tank and the kitchen stand should be reasonable according to the size of the cabinet in the home. The place where the water tank and the table are fitted should be sealed with glue relatively well. The water faucet equipment should be strong and healthy. The elm wire drawing machine, as well as the local pipeline and connection can be used. Enough dredging to ensure no leakage.