Enterprise Name: Jiashan Wang Machinery Co., Ltd.
Contact person: Manager Zhang 15921811816
General Wang 13806713135
Address: No。 31, Lane 9, Taishan Road, Huimin Street, Jiashan County, Zhejiang Province
Hydraulic cold press can be said to be a kind of furniture manufacturing machinery and equipment needed in the production of modern furniture, suit doors and decoration panels. It not only has many special advantages such as good press quality, fast speed and high efficiency, but also has simple operation and low repair rate, so it is more and more popular in the work. But if we want to further develop its good application advantages, we need to have a full understanding of the composition of the hydraulic cold press. Today, the manufacturers of hot press will give us a general idea of the components of the hydraulic cold press.
The main components of hydraulic cold press are as follows:
It is mainly composed of oil pressure system, electric control system, pressure plate and body.
Hydraulic system: It consists of cylinder, tank, oil pump, oil pump motor, control valve block and pressure gauge. The oil tank is filled with oil. The oil pump is electrically driven by the oil pump to finish the pump oil. The oil is sent to the cylinder through the connecting tubing to make the cylinder work. Its relief valve can make the pressing part extruded
Back pressure occurs during the pressing process, which has a smooth effect and an electromagnetic sphere. Valves are used to adhere to the pressure set by the system, and pressure gauges are used to show the pressure magnitude.
Electrical control system: It is mainly composed of main circuit and control circuit。 Active circuit breaker, fuse and AC contactor are selected in the circuit to protect voltage motor and solenoid valve from overload, short circuit, voltage loss and undervoltage。
Balance organization of pressure plate: the balance lifting rack, lifting gear and roll shaft are the main parts. Fixed roll bearing composition, left and right two balanced racks mounted on the fuselage. The lifting gears are fixed at both ends of the roll shaft, and bearings are installed at both ends of the roll shaft so that the roll shaft can be flexible.
Roll。 When the pressure plate is lifted, does the lifting gear not have balanced rack? Close and roll, so that the pressure plate in the process of lifting always adhere to balance。
Press plate: It is composed of upper press plate and lower press plate. The upper and lower pressure plates are welded by profiles and steel plates, and the working plane is finished by a large gantry milling machine on average to ensure smooth and lubricated working plane. The upper pressure plate is connected with the cylinder rod, and the lifting and lowering of the cylinder end the pressure plate.
Up and down. The lower pressure plate is directly welded on the base of the fuselage. Make the whole machine structure tight.
Fuselage: welded with sheet steel, compact structure and good strength.