产品中心banner

news

Contact us

Enterprise Name: Jiashan Wang Machinery Co。, Ltd。

Contact person: Manager Zhang 15921811816

                           General Wang 13806713135

Tel: 0573-84615806

Address: No. 31, Lane 9, Taishan Road, Huimin Street, Jiashan County, Zhejiang Province

Website: www.wmffw.com


Do you know the standard requirements for hydraulic oil used in hydraulic cold press?

Your current location: Home >> News >> Industry info

Do you know the standard requirements for hydraulic oil used in hydraulic cold press?

Date of release:2019-04-28 Author: Click:

The function of hydraulic cold press is still better than that of other cold press. Hydraulic cold press is a kind of commonly used manufacturing machinery and equipment for carpenter's work, such as modern furniture, suit doors, etc. It is mainly used for bonding of panel furniture and veneer of artificial board. Xiaobian has talked about many problems about hydraulic cold press in his previous articles. Do we know the standard of hydraulic oil used in hydraulic cold press?

The standard requirements for hydraulic oil of hydraulic cold press are as follows:

Requirement 1: Proper viscosity

With the decrease of temperature, the viscosity of the hydraulic oil increases, the pressure of the system loses greatly, and the power decreases. Moreover, the oil suction condition of the pump deteriorates. Cavitation and cavitation effect occur briefly, which makes the operation of the pump difficult. If the viscosity is too small, the system leaks too much, the volume loss increases, the power of the system is low, and the rigidity of the system becomes worse. In addition, the temperature of hydraulic oil will change before and after starting and during normal operation of four-column hydraulic press. Therefore, in order to make the hydraulic system work normally and steadily, the change of viscosity of working medium with temperature is required to be small.

Two: Smoothness

Good hydraulic oil can smooth the moving parts in the hydraulic system of four-column hydraulic press, reduce conflicts and reduce conflicts, so as to ensure that the system can work normally for a long time。 In recent years, hydraulic system and components are developing towards high functionalization。 Many conflict components are in smooth interval。 Therefore, hydraulic oil is required to have excellent smoothness。

Requirement 3: Preventing oxidation

Hydraulic oil and air contact will occur oxidation metamorphosis, high temperature, high pressure and some substances, such as copper, zinc, aluminum and so on, will accelerate the oxidation process. After oxidation, the acid value of the medium increases and the corrosiveness is strong. Moreover, the viscous substance produced by oxidation will block the holes and gaps of the components and affect the normal operation of the system. Therefore, the hydraulic oil is required to have excellent anti-oxidation properties.

Requirement 4: Good shear stability

When working medium passes through pumps, valves and microporous components, it suffers severe shear。 This mechanical effect can change the viscosity of the medium in two ways, i。 e。 temporary loss of viscosity at high shear rate and decrease of long-term viscosity formed after polymer tackifier molecules are destroyed。 This situation is particularly severe at high speed and high pressure。 When the viscosity decreases to a relative level, it can not be used continuously。 Therefore, the shear stability of hydraulic oil is required to be good。

Requirement 5: Antirust and non-corrosive metals

Many metal parts in hydraulic system contact with hydraulic oil for a long time, and their surface will be corroded under the effect of water and air dissolved in the medium, which will destroy the accuracy and surface quality. The circulation of corroded particles in the system will also lead to accelerated wear of components and system failure. Together, the medium itself is not allowed to have corrosive effect on metal parts, or will slowly differentiate into corrosive substances such as acids. Therefore, it is required that the oil used in cold press should have excellent metal protection, rust prevention and non-corrosive metal.

Jiashan Wangshi Machinery Co。, Ltd。 is a professional contractor of hot press, woodworking machinery equipment, glue coating machine, sawing machine, edge grinding machine, lifting platform, dust removal equipment and other woodworking machinery production and processing enterprises。



Standard for Use of Hydraulic Oil

The address of this article:http://en.wmffw.com/news/411.html

Key word:Hydraulicoil,Hydraulicoilstandard,Hydraulicoilforcoldpress

Recently browse:

木工冷压机

Address: No。 31, Lane 9, Taishan Road, Huimin Street, Jiashan County, Zhejiang Province

Tel: 0573-84615806

Contact person: Manager Zhang 15921811816

                           General Wang 13806713135

E-mail: 1592 1811816@163。com

Website Http: www。wangsmach。com


Hot press manufacturer

Sweep, pay attention to us

  • Service
  • number
    15921811816
  • Message
  • web site
  • Online Service
    Please leave a message for us
    Please input the message here, and we will contact you as soon as possible.
    name
    Contacts
    Tel
    Telephone
    mailbox
    mailbox
    address
    address
    秒速时时彩平台 秒速时时彩官网 秒速时时彩平台 北京赛车营业时间 秒速时时彩官网 北京赛车开奖走势图 秒速时时彩 安徽快3 秒速时时彩开奖 吉林快3走势