Enterprise Name: Jiashan Wang Machinery Co., Ltd.
Contact person: Manager Zhang 15921811816
General Wang 13806713135
Address:Zhejiang Company-No。 9, Lane 31, Jiashan, Zhejiang
Guangxi Agency-No。 425, Chenxiong Mechatronic City, Nanning, Guangxi
Hot press manufacturer must operate according to the standard to ensure the safety of machine and personnel. In the meantime, patrol inspection is the key point of safety standards. The following matters should be noted:
1. Check the heating, lubrication and transmission of motors, reducers and bearings every 4 hours, and check whether the operation of stroke switches and pneumatic components is normal.
2. The accumulator charging should be checked carefully for each panel.
3. Keep an eye on whether there is any obstruction between the pressing plate and the cross beam and the structure when the press rises. If there is a problem to be solved in time, keep an eye on whether the tie rod is working properly, whether it is loose or falling, and lubricate the friction surface of the wear-resistant plate of the lower cross beam once per shift.
4. Slab, pallet and blank should not stay in the press for too long to prevent fire. In case of power failure, the downward valve of the press should also be manually pushed down and the blank should be pushed out.
5. Every slab entering the machine should be inquired whether there is damage to the tray or not, and if there is abnormal attention to beat the emergency stop button.
6. Be careful to inquire whether the trolley operation of pushing slab into the loading machine is normal.
7. Inquire whether the loaded pushing slab press is blocked, whether all the blanks are pushed out of the press, if not all the pushing presses should be pulled out manually, inquire whether the baffle rises or falls in place.
8. Check whether the hot oil pump has abnormal noise and leakage.
9. Query whether the operation of front and rear baffles of press is abnormal.
10. Check whether there is leakage in the oil pipes of press and loader.
11. Clean up the dust adhering to the surface of the heat conducting oil pipe and the structure of the press carefully. No fire is allowed within the scope of the press.
12. Be careful to inquire whether there are any significant foreign objects in the press to prevent damage to the press.
13. Check whether the board gauge is loose or falling at any time. If so, it should be dealt with in time.