Enterprise Name: Jiashan Wang Machinery Co., Ltd.
Contact person: Manager Zhang 15921811816
General Wang 13806713135
Address: No. 31, Lane 9, Taishan Road, Huimin Street, Jiashan County, Zhejiang Province
Hot press manufacturers teach you what you need to pay attention to when choosing pulse hot press? Pulse hot press should select the appropriate parameters when choosing to use, so as to ensure that it can work well, such as the welding of USB arrays, as well as the welding between flexible circuit boards and circuit boards and so on.
1. When choosing to use the pulse hot press, we should find a regular shop and a specialty store to buy it, so that the quality of it can be ensured very well.
2. When choosing the pulse hot press, we should pay attention to the brand of its products, and choose promised and well-known brands to purchase. Such selection will also be of great help in the future protection and maintenance.
3. Selected type of pulse hot press, pay attention to its temperature scheduling planning, but also can be well applied to the temperature of welding products, the best choice is the temperature to be numerical control, high precision.
4. When choosing the pulse hot press, the vacuum function should be selected, so that the welding alignment can be well scheduled and the operation becomes simpler.
5. When choosing the pulse hot press, we should also make the digital press available, so that when it comes to welding operation, we can determine its pressure planning.
Warm Tips for the Use of Hot Press
For your personal safety and ensure the normal operation of the press, please follow the following tips for operation:
2. Do not put your hand in the press during the closing process.
3. After switching on the power supply, the circulation pump button should be pressed first, and then two groups of heating buttons should be suggested separately. Half an hour before work, two groups of heating buttons should be closed first, the circulation pump button should be closed before shutdown, and the press should be closed (no pressure, just closed) to keep warm and prevent falling into dust.
4. The placement of the pressing workpiece should be strictly in accordance with the requirements of the press drawing. The hot plate is covered on the surface, and the thickness of the hot plate should be kept in mind.
5. Keep the surface of the hot plate clean to prevent the uneven appearance of the hot plate caused by the long stay of fine particles.
6. When the press is not in use, make sure that each layer is put into the liner and the press is closed (the pressure is lowest) to prevent falling into the dust.
7. To change the external power supply, the first thing to do is to investigate whether the motor and the circulating pump are turning forward.
8. Tighten all parts of the screw (electrical cabinet screw, heating parts screw, fixed hot plate screw), to synchronize the organization, hot plate guide plate painting lubricant.
9. Replace heat conducting oil and hydraulic oil (Great Wall 300_or 320_heat conducting oil, 46
10. Time unit: sec second, 10s ten seconds; min minute, 10m ten minutes; hrs hour, 10h ten hours. The screw on the left under the roll time relay can change the dial value. The screw on the right under the roll time relay can change the dial unit.